24: Connect Power Meter Cable to Reference Cable

⊴ PREV

NEXT ⊵

If checking the power meter test cable, the meter will display a diagram about how to connect the additional test cable.

Remove the light source reference cable from the OPM port (but do not disturb the connection to the light source).

Connect the mating sleeve to the end of the light source reference cable, then connect the power meter test cable between the mating sleeve and the OPM port as shown on the meter.

Press any key on the meter to proceed.

Optical Wavelength Laboratories, Inc. dba Omni Wavelength Laboratories

OWL manufactures a complete line of fiber optic test equipment for a wide range of applications, including telco, WAN, MAN, LAN, SAN, CATV, IT, manufacturing, and laboratory. OWL's complete line of fiber optic testers have capabilities ranging from simple optical power and optical loss measurement to complete standards-based fiber optic link certification for both multimode and singlemode fibers, including 10-Gigabit Ethernet!

Product lines include: optical time domain reflectometers (OTDR), optical power meters, light sources, talk sets, optical length testers, visual fault locators and serial plastic fiber transceivers. All OWL optical power meters and light sources are NIST traceable.

For more information or for assistance in choosing the right fiber optic test equipment for your needs, send us an information request and we would be happy to assist you.