FIBER OWL 7 MULTIMODE BI-DIRECTIONAL CERTIFIERS
EACH BIDI CERTIFIER COMES WITH A MATCHING SET OF 2 UNITS
  

NOTE: Fiber OWL 7 Series Bi-directional Certifiers are Encircled Flux compliant when used with EF-compliant Mode Controller cables. 

Click here to learn more.




10-GIG LINK CERTIFICATION



Certify 10-gigabit optical fiber links
with several built-in Ethernet link budgets
MASTER REMOTE

(colors may vary) 
KEY BENEFITS
Set also includes:

USB Download cable

2.5mm/1.25mm universal detector adapters

NIST Certificate of Calibration

USB flash drive with software/documentation

Hard-shell carrying case
CERTIFICATION REPORTS: USED FOR LONG-TERM CABLE SYSTEM WARRANTIES AND ASSURE CLIENTS OF A JOB WELL DONE

INTUITIVE LINK WIZARD: GUIDES THE SETUP AND REFERENCE PROCESS WITH HELPFUL TUTORIAL DIAGRAMS VIA THE COLOR LCD

OPTICAL LOSS TEST SET (OLTS): SEPARATE TRANSMIT AND RECEIVE PORTS ALLOW SIMULTANEOUS DUAL-FIBER TESTING


Click here to view this video with YouTube
http://www.youtube.com/watch?v=otaO0KrybNc
TESTING TWO FIBERS AT A TIME
Testing two fibers at a time:
1) saves time by testing both fibers in opposite directions simultaneously; and
2) allows link length measurement with every test.

Fiber OWL 7 BIDI certifiers have two dual-fiber test modes:
(click the links to learn more about the test modes)

PAIR: both fibers in a pair are certified in only one direction
Cabling standards only require fibers to be tested in one direction, so PAIR mode is the fastest way to certify fiber pairs according to cabling standards.

BIDI: both fibers in a pair are certified at two wavelengths in both directions
Bi-directional testing is not required by standards, but many end-users will request BIDI testing anyway.  BIDI test mode is the more thorough, but is also more complicated and time consuming. 		 NOTE:

Fiber OWL 7 series testers come configured with the new
TIA-568-3.D
cabling standard.

This new standard introduces some changes in terminology that experienced fiber professionals should know in order to get up to speed with the new standard.

Click here for a slideshow that covers the main changes that specifically pertain to testing with Fiber OWL 7 series certifiers.

GO TO SLIDESHOW >>>
TESTING ONE FIBER AT A TIME 
Fiber OWL 7 series testers can also be used as a traditional one-fiber certifier (when used with a separate stand-alone light source), or as a stand-alone optical power meter.
(click the links to learn more about the test modes)

CERT: traditional one-fiber PASS/FAIL certification process

LOSS: optical loss measurement (no PASS/FAIL)

OPM: optical power measurement
SCROLL TO THE BOTTOM OF PAGE FOR ADDITIONAL HELPFUL FIBER OPTICS VIDEOS

FIBER OWL 7 MULTIMODE BI-DIRECTIONAL CERTIFIERS
  Model #
F7B(port1)(port2)

(click thumbnails below for videos)
 (source port codes)
M = MM
850/1300		 S = SM
1310/1550		 V = VFL X = none
          List Price
Datasheet:
F7BMX


SC		 -- -- 3335.00
(per master/remote pair)
Datasheet:
F7BMV


LC		 --

LC		 3970.00
(per master/remote pair)

Other Useful Links
Fiber OWL 7 BIDI Operations Guide
Fiber OWL 7 Series Firmware Update
OWLView Certification Software
OWLView Software Sample Certification Report
Power Meter Detector Port Cleaning Procedure
Light Source Optical Port Cleaning Procedure
NOTE: Patch cords are not included with OWL test equipment. Please call 262-473-0643 for more information.
NOTE: Products ship with owner's manuals on a USB flash drive. Adobe Acrobat Reader (tm) is required to view these documents.


HELPFUL VIDEOS

SLIDESHOW:
 Using PAIR Mode to test a pair of optical fibers simultaneously
VIDEO:
Universal Ports
VIDEO:
Mandrels
VIDEO:
Fiber Optic Reference Methods
  
VIDEO:
 Fiber Optic Cabling Standards
VIDEO:
MISCONCEPTION: Interchangeable Light Source Connector Ports  
VIDEO:
Cleaning Optical Ports  
VIDEO:
Choosing the Right Patch Cables
Fiber OWL 7 series bi-directional certifiers are ideal for the fiber optic professional who requires accurate standards-based certification of fiber links (including configuration of custom standards) and professional certification reports as proof of a job well done.

Each Fiber OWL 7 BIDI certifier comes with a matched set of testers (called a METER and INJECTOR), both of which are N.I.S.T. Traceable.
Each unit includes an OPM port (also called "detector" or "receiver") and a source port.
Each set comes in a hard-shell carrying case, and includes protective rubber boots, certificates of NIST-traceability, and a USB flash drive with free OWLView certification software, USB driver, and operation manual.